VSB – 1000 standard

TECHNICAL SPECIFICATIONS	VSB 700	VSB 1000
Spindle Movement	200 mm	200 mm
Spindle Speed	30-300 rpm	30-300 rpm
Diameter of Bored Holes	18-35 mm	18-60 mm
Spindle Tilt Angle	15 degrees	15 degrees
Longitudinal Head Stroke	700 mm	1000 mm
Cross Head Stroke	40 mm	40 mm
Maximum Dimensions of Head Block	700×450 mm	1000×550 mm
Spindle Motor	1 HP / 0.75 kW	1 HP / 0.75 kW
Air Requirements	6 bar / 100 psi	6 bar / 100 psi
Power Supply	3 phase – 50 Hz – 415 V	3 phase – 50 Hz – 415 V
Approximate Weight	600 kg	800 kg
Machine Dimensions in mm (L x W x H)	1150 x 1000 x 2150	1400 x 1150 x 2150

STANDARD ACCESSORIES	VSB 700	VSB 1000
Adapter	1 pc.	1 pc.
Tool Holder Ø 18-35 mm	1 pc.	OPTION
Tool Holder Ø 18-60 mm	OPTION	1 pc.
Tool Holder Ø 18-30 mm	1 pc.	OPTION
Tool Holder Ø 28-42 mm	OPTION	1 pc.
Tool Holder Ø 40-60 mm	OPTION	1 pc.
Winch (Remote)	3 pcs.	6 pcs.
Shaping Tool	2 pcs.	4 pcs.
Thread tapping tool	1 pc.	1 pc.
Tool mounting device	1 set	1 set
Hex keys (9 pcs.)	1 set	1 set
Clamping plate for mounting single-cylinder blocks	1 pc.	OPTION
Pressure gauge	1 pc.	1 pc.
Digital centering device	1 pc.	1 pc.
Vacuum gauge	1 pc.	1 pc.
Screw (M6 x 75, M6 x 100, M6 x125)	2 pcs. each	OPTION
Bushings, small and medium	1 pc. each	1 pc. each
Pedal valve	1 set	1 set
Spanner 22-24	1 pc.	1 pc.
Depth adjustment device with digital display	1 set	1 set

OPTIONAL ACCESSORIES

Sharpening tool

Finishing assembly

Clamping device for valve guiding

VALVE SEAT GRINDER POSITION

Stable construction ensures a smooth surface.
A work lamp is provided for illuminating the work area even in darkness.
A convenient storage system is provided for storing used tools.
We offer triangular plates made of sintered carbides for simultaneous machining of all three angles of the seal and ensuring precise final seating angle.
A manual handle with precise feed for machining the seal seat is located on the right side of the work head for ease of operation.
AC drive and electric motors provide greater torque during valve seat machining.
The spindle head tilts 15 degrees in both directions, allowing for work with all new generation cylinder block heads, whether imported or Indian.